Cherry Creek Double Hung Kit
|
|
The Double Hung Kit is designed for older homes where the jambs are already in place. It is a cost effective way of replacing your old double hung without the complications of complete new windows. The original sill, jamb and trim remains in place and only the sash and glass are replaced. Two vinyl jamb liners are installed in place of the ropes and pulleys in order to account for the extra weight of the glass. There are many advantages to using these jamb liners on your new windows, including easy operation, good weather seal and energy efficiency, tilt-in cleaning, and complete removal of sashes if necessary.
Double Hung Kit standard features:
- Solid clear vertical grain fir sash in paint or stain grade
- Energy efficient glass with low-e and argon
- Solid brass latch and lift
- Vinyl jamb liner in white or beige
- Weather stripping at top, bottom, and check rail
Double Hung design ideas
Double Hung Kit Install Instructions
|
The following options are available for this product
Vinyl Tracks
Although we know that vinyl tracks are not part of a traditional window, they provide the best seal you can get on a window that slides. They allow for tilt-in cleaning, touch-up painting, and easy maintenance of your new windows. With no wood to wood contact you never have to worry about your windows being stuck shut. They come in white or beige. These light colors reduce warping and brittleness due to sun exposure.
White
Beige
Latches & Lifts
Latches hold a double hung shut. Lifts are the handles used to open a double hung. Both latch and lift are solid brass and come in three colors. Small double hungs require one of each while larger doublehungs may require two.
Dark Bronze
Bright Brass
Luma
.
.
Dark Bronze
Bright Brass
Luma
Sticking Details
Sticking is the detail in the wood that surounds the glass in a window. It helps direct moisture away from the glass, while providing a decorative appearance. Below are our standard patterns. Notice that two patterns allow for true divided lites (TDL) and one of our patterns allows simulated divided lites (SDL). Ask about advantages of each for your individual situation.
1/4" OG
1/2" OG
Cove Bead
Overlay
.
.
1/2" OG TDL
Cove Bead TDL
Overlay Muntin
Thermal lead
Our thermal leading is custom made to order. The drawing below shows a piece of insulated glass cut in half. The lead is applied to both sides of one of the panes of glass so it can be seen from both sides. We leave the lead off of the other side of the glass to allow for a low-e coating for maximum energy efficiency.
1/4"
1/4" perimeter
3/8"
3/8" perimeter
Dual face
|
